Accessories
The National Instruments accessories comprise a wide variety of terminal blocks, connector blocks, expanders, rack-mount kits, and other types of accessories that can be used with NI instruments. NI accessories can be purchased with other NI products to configure systems for different requirements.
| Accessories | Description | Stock Level |
| 182444-01 | R50M-50F 3 Inch Ribbon Cable for Use With SH6850 Cable | Call |
| 194096-01 | National Instruments 194096-01- for use with Digital Flying-Leads Cable | Call |
| AMUX-64T | National Instruments AMUX-64T- compatible with E Series DAQ devices | In Stock Ships Today |
| APC Uninterruptible Power Supply | NI APC Uninterruptible Power Supply with 120 or 240 V Options | Call |
| APS-4100 | National Instruments APS-4100 Auxiliary Power Supply | In Stock Ships Today |
| ATCA-3671 | National Instruments ATCA-3671- 64 DMA channels | Call |
| BNC-2090A | NI BNC-2090A- for E/M Series DAQ Devices | In Stock Ships Today |
| CA-1000 | National Instruments CA-1000- for use with NI DAQ devices | In Stock Ships Today |
| CAL-4300B | CAL-4300B Calibration Accessory with 1:30 Attenuation Ratio, | Call |
| CAL-4309 | NI CAL-4309 Calibration Accessory for the PXIe-4309 with Banana Plug Connection | Call |
| CAL-4330 | CAL-4330 Calibration Fixture for Use With the PXIe-4330 and the PXIe-4331 | Call |
| CAL-9219 | CAL-9219 Calibration Fixture for the NI-9219 with Built-In Voltage and Current Excitation | Call |
| CB-100 | NI CB-100- designed for most 100-pin, NI DAQ boards | Call |
| CB-2162 | National Instruments CB-2162- 6 control I/O channels | In Stock Ships Today |
| CB-2180 | National Instruments CB-2180- compatible with SHS68-C68-S cable | Call |
| CB-27 | National Instruments CB-27 Connector Block- 30-position right angle connector | Call |
| CB-68LP | National Instruments CB-68LP- 68-pin connector | In Stock Ships Today |
| CB-68LPR | National Instruments CB-68LPR Desktop Mount Connector Block | In Stock Ships Today |
| CC05120X | NI CC05120X- 5 Arms measure current | Call |
| CC0550X | NI CC0550X- current oscilloscope probe | Call |
| CC15010X | NI CC15010X- 150 A current | Call |
| CC30100X | NI CC30100X- 30 Arms measure current | Call |
| CC3050X | NI CC3050X- current oscilloscope probe | Call |
| CC5002X | NI CC5002X- 500 A measure current | Call |
| CDA-2990 | NI CDA-2990 Clock Distribution Device with GPSDO Option Available | Call |
| cFP-PM-H | cFP-PM-H Horizontal Panel Mounting Kit for 4 Slot and 8 Slot Backplanes | Call |
| cFP-RM-8 | National Instruments cFP-RM-8 Rack Mounting Kit | Call |
| CP400X | NI CP400X- 10 X attenuation | Call |
| CP500X | NI CP500X- -60 V to 60 V voltage range | Call |
| CPS-8910 | National Instruments CPS-8910- compatible with copper and fiber optic cables | Call |
| cRIO-9912 | cRIO-9912 DIN Rail Mount Kit for cRIO and cDAQ | In Stock Ships Today |
| cRIO-9915 | cRIO-9915 DIN Rail Mount Kit 8-Slot cRIO and cDAQ Modules | Call |
| cRIO-9932 | National Instruments cRIO-9932- for use with 10-position, spring terminal C Series modules | In Stock Ships Today |
| cRIO-9933 | cRIO-9933 37 Pin DSUB Connector Kit | Call |
| cRIO-9934 | cRIO-9934 25 Pin D-SUB Connector | Call |
| cRIO-9936 | National Instruments cRIO-9936- contains 10 screw terminal plugs | Call |
| cRIO-9938 | National Instruments cRIO-9938 High-Voltage Backshell | Call |
| cRIO-9940 | National Instruments cRIO-9940- compatible with the cRIO-9974 | In Stock Ships Today |
| cRIO-9952 | National Instruments cRIO-9952- PCB right‑angle 15‑position D‑SUB connectors | Call |
| cRIO-9953 | National Instruments cRIO-9953- custom connectivity options | Call |
| cRIO-9954 | National Instruments cRIO-9954- 8 LED slots | Call |
| cRIO-9955 | National Instruments cRIO-9955- no LED slots | Call |
| cRIO-9956 | National Instruments cRIO-9956- PCB right-angle D-SUB connector | Call |
| cRIO-9957 | National Instruments cRIO-9957- requires NI-9958 for a complete enclosure | Call |
| CSM-10A | National Instruments CSM-10A- 400 mV burden voltage | Call |
| CSM-200mA | National Instruments CSM-200mA- 250 max working voltage | In Stock Ships in 5-10 Days |
| DB15M-15ScT | DB15M-15ScT Unshielded Screw Terminal Breakout with 15 Pin DSUB Connection | Call |
| Digilent myDigital | NI Digilent myDigital Accessory Protoboard with Analog and Digital Functionality | Call |
| Digilent myProto | NI Digilent myProto Protoboard Accessory Board for myDAQ | Call |
| DIN-BNC | National Instruments DIN-BNC DIN Rail-Mountable BNC Adapter | Call |
| EMI Suppression Ferrite | National Instruments EMI Suppression Ferrite- 5.1, 10.2, or 13.4 mm sizes | Call |
| ER-16 | National Instruments ER-16- 10 ms operate time, 5 ms release time | In Stock Ships Today |
| ER-8 | National Instruments ER-8 Relay- 5 ms release time | In Stock Ships Today |
| EXM-GPIB | National Instruments EXM-GPIB Board- 24-pin connector | Call |
| FD-11940 | NI FD-11940- compatible with FD-11613 and FD-11614 | Call |
| FD-11950 | National Instruments FD-11950- 4 A max. current | Call |
| FD-11951 | National Instruments FD-11951- 60 V rated voltage | Call |
| FD-11952 | National Instruments FD-11952 M12 Male Straight Connector | Call |
| FD-11953 | FD-11953 Field Serviceable Connector with 8 Pins | Call |
| HDD-8263 | National Instruments HDD-8263 1U Chassis | In Stock Ships in 5-10 Days |
| HDD-8265 | National Instruments HDD-8265 RAID Array- 750 MB/s | Call |
| HDD-8266 | National Instruments HDD-8266- 3.6 GB/s | Call |
| IMAQ-A6804 | IMAQ-A6804, 4 BNC Connector, 68 Pin VHDCI Connector, 1 m, Vision Products Cable | In Stock Ships Today |
| IP67 Power Supply | National Instruments IP67 Power Supply- 8 A or 5 A output current | Call |
| MCA-7790M | National Instruments MCA-7790M- 5 LEDs | Call |
| MCA-7790P | National Instruments MCA-7790P- 3 LEDs | In Stock Ships Today |
| MCA-7790Y | National Instruments MCA-7790Y- 24 V power supply | Call |
| MKD-1117 | NI MKD-1117, 100 to 240 VAC, 17 Inch LCD Monitor, Rack Mountable Monitor and Keyboard Drawer | In Stock Ships Today |
| NEMA L6-20P | NEMA L6-20P Power Cord that is 2.5 Meters Long | Call |
| NI Instrument Simulator | National Instruments NI Instrument Simulator- connects to E Series & 50 pin MIO boards | In Stock Ships Today |
| NI-9901 | NI-9901 Desktop Mounting Kit with 2 Adapter and 2 End Brackets | In Stock Ships Today |
| NI-9918 | National Instruments NI-9918- compatible with CompactDAQ and CompactRIO Chassis | Call |
| NI-9921 | National Instruments NI-9921- can house 1 WLS-9xxx device | Call |
| NI-9922 | National Instruments NI-9922 Wi-Fi and Ethernet UP Enclosure Kit provides a minimum IP 54 protection | Call |
| NI-9927 | National Instruments NI-9927- compatible with NI-9474 module | In Stock Ships Today |
| NI-9928 | NI-9928 Backshell Kit- for use with NI-9266 and NI-9252 | Call |
| NI-9931 | NI-9931 Screw-Terminal Accessory | Call |
| NI-9933 | NI-9933 37-Pin D-Sub Connector Kit | Call |
| NI-9934 | National Instruments NI-9934 25-Pin D-SUB Connector | In Stock Ships Today |
| NI-9939 | NI-9939 Backshell Kit Compatible with 16-Position Spring or Screw Terminal Connectors | In Stock Ships Today |
| NI-9940 | National Instruments NI-9940- compatible with NI-9375 | In Stock Ships Today |
| NI-9944 | NI-9944 Quarter Bridge Completion Accessory with 120 Ohm | Call |
| NI-9949 | NI-9949 NI Accessory for RJ-50 to Screw-Terminal Conversion | In Stock Ships Today |
| NI-9971 | NI-9971 Backshell Kit Compatible with 2-Position Connector Block | Call |
| NI-9972 | National Instruments NI-9972- includes 4 backshells | Call |
| NI-9979 | National Instruments NI-9979 Strain Relief Clamp | Call |
| NI-9981 | National Instruments NI-9981 Backshell Connector Kit | Call |
| PC-MF4-PT | National Instruments PC-MF4-PT Power Cable | Call |
| PC-MF4-Y | PC-MF4-Y Microfit Power Y-Adapter that is 0.2 Meters | Call |
| PS-OP01 | National Instruments PS-OP01- compatible with the CC5002X | Call |
| PS-OP02 | National Instruments PS-OP02- BNC connectors | Call |
| PXI Filler Panel | NI PXI Filler Panel Designed for PXI Chassis | In Stock Ships Today |
| PXI Slot Blocker | NI PXI Slot Blocker Kit with 5 Slot Blockers | In Stock Ships Today |
| PXI-1045 Rackmount Kit | NI PXI-1045 Rackmount Kit with Front Rack and Optional Rear Mount for PXI-1045 Chassis | Call |
| PXI-CardBus8310 | National Instruments PXI-CardBus8310 Interface Kit | In Stock Ships Today |
| PXIe-4163 | NI PXIe-4163 PXI Source Measure Unit with 62-Pin DSUB I/O Connector | Call |
| REM-11180 | National Instruments REM-11180 Bus Coupler for Remote I/O | Call |
| SA-413T | SA-413T Triaxial Adapter with 1 Screw Terminal | Call |
| SA1000X | National Instruments SA1000X- 10 X attenuation | Call |
| SA1500X | National Instruments SA1500X Probe with -8 V to 8 V voltage range | Call |
| SA2500X | National Instruments SA2500X- 1.3 m cable length | Call |
| sbRIO-9695 | sbRIO-9695 sbRIO-9695 Heat Spreader Thermal Kit for sbRIO Modules | Call |
| SCB-100A | National Instruments SCB-100A- designed for 100-pin digital I/O modules and devices | In Stock Ships Today |
| SCB-19 | National Instruments SCB-19- H19 and screw terminal connectors | Call |
| SCB-68 | NI SCB-68 Shielded I/O Connector Block with 68 Screw Terminal Connections | In Stock Ships Today |
| SCB-68 HSDIO | SCB-68 HSDIO Shielded I/O Connector Block with 68 Pin VHDCI and 72 Screw Terminals | Call |
| SCC-LP05 | National Instruments SCC-LP05 Lowpass Filter Module | Call |
| SCXI-1371 | NI SCXI-1371 Rack Mount Kit with 4 Slots | Call |
| SCXI-1382 | SCXI-1382 12 V Battery Pack for the SCXI-1000DC Chassis | Call |
| Serial DTE TO DCE | Serial DTE TO DCE Adapter with RS-232 Interface | In Stock Ships Today |
| SMA-2164 | National Instruments SMA-2164- 44 resistors | In Stock Ships Today |
| SMA-2165 | National Instruments SMA-2165- 5 V maximum voltage | Call |
| SMA-SMA-SMA T Connector | National Instruments SMA-SMA-SMA T Connector- 0 to 10 GHz measure frequency | Call |
| SMA-SMB Adapter | National Instruments SMA-SMB Adapter- 0 GHz to 4 GHz measure frequency | Call |
| SMB-2145 | National Instruments SMB-2145- 5.5 V maximum voltage rating | Call |
| SMB-2146 | National Instruments SMB-2146- designed for the NI-5752 | Call |
| SMB-2147 | National Instruments SMB-2147- designed for the NI-5751 | Call |
| SMB-2148 | National Instruments SMB-2148- 1.2 ns typical propagation delay | Call |
| SMB-2153 | National Instruments SMB-2153 Breakout Box Accessory | Call |
| SMB-2163 | NI SMB-2163 Digital I/O Accessory with One 68-Pin DDC Connector | In Stock Ships Today |
| SP200B | NI SP200B- 10 X, 1 X attenuation | In Stock Ships Today |
| SP500C | NI SP500C- voltage range from-300 V to 300 V | Call |
| SP500X | NI SP500X- single-ended passive probe | Call |
| Starter Kit for ISC-178X Smart Cameras | National Instruments Starter Kit for ISC-178X Smart Cameras | Call |
| TB-4162 | NI TB-4162 Breakout Accessory for the PXIe-4162 with Screw Terminals | Call |
| UES-3880 | UES-3880 IEEE802.3/802.3u/802.3x Smart Ethernet Switch | In Stock Ships Today |
| USB-1357 | National Instruments USB-1357- USB 2.0 full-speed | Call |
| USB-1358 | National Instruments USB-1358- compatible with the SCXI-1127/1128/1129 and SCXI-1175 modules | Call |
| USB-1359 | National Instruments USB-1359- 300 Vrms or VDC maximum voltage | In Stock Ships Today |
| USB-6008-09 | NI USB-6008/09 Prototyping Circuit Accessory with Support up to 30 Vrms | In Stock Ships Today |
| WSN-3283 | National Instruments WSN-3283 Panel Mount Plate | Call |
| 763000-01 | National Instruments 763000-01- 2.3 m | Call |
| 763064-01 | National Instruments 763064-01- AC, 2.5 m Power Cord | Call |
| 763065-01 | National Instruments 763065-01- 10 A maximum current | Call |
| 763066-01 | National Instruments 763066-01- 2.5 m IEC Power Cord | Call |
| 763067-01 | National Instruments 763067-01- 2.5 meter cable length | Call |
| 763068-01 | National Instruments 763068-01- 3 m | Call |
| 763634-01 | National Instruments 763634-01- 2.29 m | Call |
| 763830-01 | National Instruments 763830-01- 15 A maximum current | Call |
| 776844-01 | 776844-01 SCB-68 Shielded I/O Connector Block with 16 Bit Resolution | Call |
| 776990-01 | 776990-01, 100 Pin Female Connectors, SCB-100 Shielded I/O Connector Block | Call |
| 777080-01 | 777080-01 ER-8 Electromechanical Relay with 8 Relays | Call |
| 777081-01 | 777081-01 ER-16 Electromechanical Relay with 16 Isolated SPDT Channels | Call |
| 777145-01 | 777145-01 CB-68LP Connector Block with 68 Screw Terminals | Call |
| 777145-02 | National Instruments 777145-02 Connector Block | Call |
| 777664-01 | 777664-01 NI Configurable Signal Conditioning Enclosure | Call |
| 777687-70 | National Instruments 777687-70 Rack-Mount Kit | Call |
| 777687-71 | 777687-71 SCXI-1371 Rack-Mount Kit with 6 Position Brackets | Call |
| 778662-01 | NI 778662-01 Replacement Power Supply & Fan Shuttle for PXI-1042 Chassis | Call |
| 778747-01 | National Instruments 778747-01 Single-Ended Digital I/O Accessory | Call |
| 778948-01 | NI 778948-01 Rack-Mount Kit for PXI-103x and PXIe-107x Chassis | In Stock Ships in 5-10 Days |
| 779556-01 | 779556-01 BNC-2090A Multifunction DAQ Accessory with 16 Channels | Call |
| 779567-01 | 779567-01 NI-9940 Backshell Connector Block Kit | Call |
| 780553-01 | NI 780553-01 C Series CAN Cable Kit | Call |
| 780910-01 | NI 780910-01- PXI-103x Chassis Fan Replacement Kit | Call |
| 780986-01 | National Instruments 780986-01- compatible with NI-9231 module | Call |
| 781482-01 | NI 781482-01- for use with the PXI-103x and PXIe-107x Chassis | Call |
| 781587-01 | NI 781587-01- K-type calibration | Call |
| 781620-01 | National Instruments 781620-01 RAID Array | Call |
| 782066-01 | NI 782066-01- for Basler ace GigE Vision Cameras | Call |
| 782290-01 | NI 782290-01- 2 A maximum current | Call |
| 782364-01 | NI 782364-01 Automatic VNA Calibration Kit with 70 MHz-9 GHz Range | Call |
| 782432-01 | National Instruments 782432-01 Source Measure Unit (SMU) | Call |
| 782444-01 | 782444-01 SCB-19 AUX I/O Connector Block that is Noise Rejecting | Call |
| 782536-01 | NI 782536-01, Noise Rejecting, 68 Pin SCB-68A Shielded I/O Connector Block | Call |
| 782573-01 | National Instruments 782573-01- 5 m cable with SMA | Call |
| 782715-01 | National Instruments 782715-01 Backshell Kit | Call |
| 783001-8192 | NI 783001-8192- for the PXIe-8840, PXI-8840, and PXIe-8821 | Call |
| 783198-01 | 783198-01 NI SCB-68 HSDIO with 35 mm DIN Rail | Call |
| 783422-01 | 783422-01 HDD-8266 RAID Array with 24 Ports | Call |
| 784257-01 | 784257-01 SA2500X Active Oscilloscope Probe with 2.5 GHz Bandwidth | Call |
| 784300-01 | NI 784300-01- for use with the NI-9246 and NI-9247 | Call |
| 784306-01 | 784306-01 CDA-2990 Clock Distribution Device with 8 Channels | Call |
| 784307-01 | 784307-01 CPS-8910 Cabled PCIE Switch Box with 10 Ports | Call |
| 784634-01 | National Instruments 784634-01- compatible with NI-793XR Series | Call |
| 784685-01 | National Instruments 784685-01- 2.5 m, 10 A current | Call |
| 784686-01 | National Instruments 784686-01- 2.5 m | Call |
| 785024-01 | 785024-01 SCB-100A Shielded I/O Connector Block with 100 Screw Terminals | Call |
| 785082-01 | 785082-01 NI-9939 Backshell Kit with Spring Terminals | Call |
| 785125-01 | NI 785125-01- 5 A maximum current | Call |
| 785562-01 | 785562-01 CC30100X Oscilloscope Probe with 100 MHz | Call |
| 785626-01 | National Instruments 785626-01- AC Power Cord | Call |
| 785628-01 | NI 785628-01- for use with the NI-9210 module | Call |
| 785699-01 | National Instruments 785699-01- 128 GB maximum | Call |
| 785701-01 | National Instruments 785701-01- Replacement for the HPE 240 GB SSD | Call |
| 786162-01 | 786162-01 NI-9972 Backshell Strain Relief Kit For 6-Position Connector Blocks | Call |
| 786377-01 | National Instruments 786377-01- 12 A maximum current | Call |
| 786847-01 | 786847-01 CC05120X Oscilloscope Probe | Call |
| 786848-01 | National Instruments 786848-01 Oscilloscope Probe | Call |
| 786849-01 | National Instruments 786849-01 Oscilloscope Probe | Call |