Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
USB-8476S Request for Availability
USB-8476S, 1-Port, Synchronized, LIN Interface Device
Rated 4.9/5 | 7 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments USB-8476S LIN Interface Device
Featured with synchronization capabilities, the National Instruments USB-8476S (Part Number: 779795-01) is a LIN Interface Device. This USB based model is designed for logging, monitoring, and testing your LIN network. The USB-8476S features master/slave termination with a provision of software selection and has one port. This LIN Interface Device comes equipped with a powerful, integrated LIN transceiver, i.e. Atmel ATA6620. The ATA6620 is a powerful transceiver designed to comply with the requirements as defined in the ISO-9141 standard. The NI USB-8476S is known for its power synchronization capabilities because it has all the required resources to fulfill tight integration demands of LIN, CAN, digital, and analog measurements that are often found in various automotive applications.
This LIN Interface Device can share triggering and timing signals with a broad range of vision devices, USB interfaces, as well as motion and data acquisition devices. With hardware-controlled triggering and timing signals, optimal determinism remains maintained between the trigger signal and the required response. With the USB-8476S, you can synchronize different parameters through software to correlate data according to your requirements.
The fully integrated LIN transceiver incorporated in this LIN Interface Device has a built-in 5V/50 mA low-drop voltage regulator. Thus, the ATA6620 offers a powerful combination of bus transceiver and voltage regulator to develop powerful yet simple slave nodes. This LIN controller is designed to work with low-speed data communication often found in vehicles. To guarantee minimized power consumption, the ATA6620 can operate in Sleep mode and Silent mode. In addition to a 9-pin D-Sub connector, the NI USB-8476S has a 3-pin COMBICON connector that is used for synchronization.
USB-8476S Mature Status has been announced by National Instruments, but the LIN Interface Device will still be available for purchase and repairs by Apex Waves.
| Model | USB-8476S |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 779795-01 |
| Type | LIN Interface Device |
| Ports | 1 |
| USB Power Requirements | 200 mA, 5 VDC |
| Supported Baud Rates | 2,400 to 20,000 baud |
| I/O Connector | 9-pin male D-Sub, optional 3-pin COMBICON for synchronization |
| Cable Length | 2 m |
| Warranty | 2-3 Year Warranty |
| USB-8476S Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for USB-8476S:
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
