Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
M9362A Request for Availability
Agilent M9362A, 1.5 Ghz Bandwidth, 4 Channels, PXIe Quad Downconverter
Rated 4.5/5 | 8 ratings
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Agilent M9362A PXIe Quad Downconverter
The Agilent M9362A PXIe Quad Downconverter is an industrial microwave down-conversion module for advanced automation. It operates from 10 MHz to 26.5 GHz with coherent performance. The unit’s each downconverter channel provides 1.5 GHz instantaneous bandwidth for supporting wideband signal analysis. It offers 4 phase coherent channels for multiport capture and comparison. The RF input of M9362A spans from 0.01 to 26.5 GHz and its local oscillator input supports the same microwave tuning range for flexible architectures. Its RF and LO ports use rugged 3.5 mm female connectors that are suited for high frequency test environments. The IF output of this module covers 7 MHz to 1.5 GHz bandwidth.
The M9362A withstands RF input levels up to +18 decibel mW before encountering damage thresholds and its local oscillator input tolerates up to +5 decibel mW safely. Its optimal operation uses a local oscillator drive of 0 decibel mW and an RF input near -10. RF input at 0.1 decibel compression exceeds -10 decibel mW across ports A through D. The quad downconverter delivers defined conversion gain characteristics for supporting accurate system level calibration and modeling. Its typical noise figure is 24 decibels for supporting low level signal evaluation tasks. The unit’s channel to channel isolation is more than -85 decibels that helps minimize crosstalk between simultaneous measurement paths. Its local oscillator to intermediate frequency leakage remains below -29 decibels for supporting clean digitizer input spectra.
The Agilent’s M9362A occupies 3-PXIe slots and integrates seamlessly into modular chassis. It supports PXIe and PXIe hybrid slots which simplifies system layout within industrial automation platforms. The unit ships with a functional certificate and requires no annual calibration which reduces maintenance overhead. When paired with the Agilent M9302A local oscillator, the M9362A enables wideband microwave frequency translation architectures. Its combining channels with M9210A high speed digitizers support multi-GHz bandwidth signal acquisition chains. The coherent architecture of this unit allows synchronized capture across 4 inputs supporting phase sensitive industrial measurements. Its typical deployments include radar validation electronic warfare testing and broadband communication analysis within automated test systems. Control of the downconverter uses Agilent IO Libraries on supported Windows operating environments. Its recommended controller configurations provide multi-GHz class processors and at least 1 GB system memory capacity. The unit’s RF input port match supports efficient power transfer and limits reflections across the microwave operating range.
| Model Name | M9362A |
|---|---|
| Manufacturer | Agilent / Keysight |
| Part Type | PXIe Quad Downconverter |
| Noise Figure | 24 dB |
| Channel-to-Channel Isolation | < –85 dB |
| Supported Operating Systems | Windows XP SP3 (32-bit), Windows 7 (32-bit & 64-bit) |
| Processor Requirements | Windows XP: 600 MHz minimum (800 MHz recommended) Windows 7: 1 GHz 32-bit or 64-bit (Itanium not supported) |
| Disk Space Required | 1.5 GB total |
| Frequency Range | 10 MHz to 26.5 GHz |
| Instantaneous Bandwidth | 1.5 GHz per channel |
Associated part numbers for M9362A:
Delivery:
No hassle return policy.
Dedicated customer service team.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
